Visor Repair

040417-5278 A pin slips into each end of the visor. One end has a large diameter pin and the other end is smaller. The larger diameter version is clamped to provide an adjustable tension to hold the visor in a fixed position.

In my case the plastic carrier for the larger diamter pin had cracked and expanded over the years, possibly because it had frozen in the visor and when the visor was mover, it broke the plastic carrier. Whatever the reason, I filled the crack and inside of the hole with an epoxy and replaced the pin, letting the epoxy harden.
040417-5279 The hole in the visor is for the screw that tightens the clamp around the pin on the mounting hardware.
Last modified: Sat, 17 Apr 2004


Site Details. Disclaimer. Comments? Questions? Dave Hillman
Content attribted to others remains their property. Otherwise the text and images are licensed under a Creative Commons License.
Creative Commons License Valid XHTML 1.0 Transitional Valid CSS!