Visor Repair - 17 Apr 2004.
My visor was loose enough to fall down when I went over a bump. It
has been like that for a long time and I finally decided to do
something about it. After taking it apart, I saw that one of the
mounting brackets was broken. I've repaired it with epoxy which should
give me some more years of life out of it.
My seat belt installation was a least
effort activity and has some problems that I have discovered and
others have pointed out to me. Craig Pierce has put new seat belts
where his time and money was. ...
Have you noticed that reach to fourth gear is a bit long? I actually
have to lean forward a bit to reach the shift knob for that
gear. Porsche and other vendors have addressed this problem with short
Some concern has been expressed about the safety of the shoulder
attach point. The bolt diameter is smaller than the standard
7/16". This fact in combination with the high attach points for the
lower bolts suggests it would be ...
Now that the engine noise is under control, it makes sense to add some
speakers to go with the Sony Receiver. My first effort was to mount
Blaupunkt 4 in. two way speakers under the dash which puts them out of
sight, looses the high ...
One of the problems with the old Porsches is their seats. We knew from
the beginning that the factory seats would have to be replaced with
newer ones. The old ones were too soft, too low and there is no head