Removing and Refitting Regulator Switch


  1. Disconnect battery.
  2. Remove leads from regulator.
  3. Undo fixing bolts and detach regula tor.


The following should be noted:

  1. When exchanging the regulator first check that there is no short to earth in the field coils of the generator.
  2. Connect cables as per wiring diagram on regulator housing.
  3. Polarise generator (see 5 LI note).
  4. If incorrect values are obtained even after fitment of a new regulator either the generator or the wiring system is not in order and a Bosch service station should be contacted.
Last modified: Sat, 15 Jan 2005


Site Details. Disclaimer. Comments? Questions? Dave Hillman
Content attribted to others remains their property. Otherwise the text and images are licensed under a Creative Commons License.
Creative Commons License Valid XHTML 1.0 Transitional Valid CSS!