Previous  Up  Next

Jesse Silverman - Holes in Clusters


Notice how on your car the front is not perfectly flat so the holes in the lip must be in clusters of about four, but use your car as reference for cluster positioning.

For the holes I used a 3/16 in. drill bit and placed the holes ~1 in. apart. Once you have drilled the pan and the gas tank support there are several areas to drill on the car itself. The first is on each side where there is a flange that runs along the center of the two "legs" of the pan. The other place to drill is along the bottom edge of the front wall of the car.
Last modified: Mon, 18 Aug 2003


Site Details. Disclaimer. Comments? Questions? Dave Hillman
Content attribted to others remains their property. Otherwise the text and images are licensed under a Creative Commons License.
Creative Commons License Valid XHTML 1.0 Transitional Valid CSS!