Previous  Up  Next

Jesse Silverman - Remove Old Pan


Be careful because it is easier to remove metal than it is to put new metal on. So when in doubt on whether something should be removed, don't do it until you are absolutely positive it is on one of the two new pieces you are going to weld in. Also make sure to measure the length of the pan and cut the old one out a little long so the new one would overlap if installed (Later you can grind it down more, but for now leave a little extra).
Last modified: Mon, 18 Aug 2003


Site Details. Disclaimer. Comments? Questions? Dave Hillman
Content attribted to others remains their property. Otherwise the text and images are licensed under a Creative Commons License.
Creative Commons License Valid XHTML 1.0 Transitional Valid CSS!