Previous  Up  Next

Pertronix Rev Limiter Connection Digram


Here we see the connection diagram included in the Digital Rev Limiter documentation.

  1. Attach the BLACK wire to a good engine ground. Make sure to remove any dirt or paint beforehand. We used the ground point next to the voltage regulator.
  2. Attach the RED wire to a 12 volt power source controlled by the ignition switch. We are using the wire to the coil.
  3. Attach the YELLOW wire to the coil's negative terminal.
  4. The ORANGE wire is not used.
  5. The WHITE wire is a tachometer output but is incompatible with the 912 tachometer according to my tests.
Last modified: Sun, 17 Jul 2005


Site Details. Disclaimer. Comments? Questions? Dave Hillman
Content attribted to others remains their property. Otherwise the text and images are licensed under a Creative Commons License.
Creative Commons License Valid XHTML 1.0 Transitional Valid CSS!