Previous  Up

Install Oil Seal


  • 1. Inspect timing gear cover for absence of damage.
  • 2. Inspect Bearing 4 seating bore in timing gear cover.
  • 3. Turn set screw of Bearing 4 until the tip of the screw projects approx. 1 mm into the bearing seating bore in timing gear cover.
  • 4. Heat timing gear cover to approx. 160 deg C (320 deg F) and install Bearing 4 using special tool P 27a.
  • 5. Tighten the bearing set screw; make sure that the screw is not too long, such as to exert pressure upon the bearing.
  • 6. Insert oil deflector.
  • 7. Install oil seal using P 73 installer.
Last modified: Mon, 17 Jan 2005


Site Details. Disclaimer. Comments? Questions? Dave Hillman
Content attribted to others remains their property. Otherwise the text and images are licensed under a Creative Commons License.
Creative Commons License Valid XHTML 1.0 Transitional Valid CSS!