Previous  Up  Next

45 deg Cut


1. 45 deg seat cut:

The 45 deg cut must be performed with particular care to produce a smooth surface free of chatter marks. It is very important to apply pressure from directly above. Removal of base metal must be held at a minimum so as not to render the valve seat insert prematurely unusable. The cutting procedure should be discontinued as soon as the cutter has cleaned the entire seat area,
Last modified: Mon, 17 Jan 2005


Site Details. Disclaimer. Comments? Questions? Dave Hillman
Content attribted to others remains their property. Otherwise the text and images are licensed under a Creative Commons License.
Creative Commons License Valid XHTML 1.0 Transitional Valid CSS!