Previous  Up  Next

Door Lock - Interior Lock and Open Rods


Here is the old lock and the actuating rods for the interior door lock and opening. I reused the rods, but had to change the mounting mechanism. There are swagged in 4 mm pins on this lock and 6 mm holes on the new design. This was solved using 5 mm bolts, washer and elastic stop nuts to prevent the bolt from loosening.
Last modified: Sun, 06 May 2001


Site Details. Disclaimer. Comments? Questions? Dave Hillman
Content attribted to others remains their property. Otherwise the text and images are licensed under a Creative Commons License.
Creative Commons License Valid XHTML 1.0 Transitional Valid CSS!