Previous  Up  Next

A-arm with Bronze Bushings


When the rear end of the a-arm is cleaned up and sanded the bronze bushing will slide on. It will be protected by grease and is renewed through the zirk fitting.

The front end requires less preparation, sliding the sleeve over the end held in place with shims between the a-arm and the sleeve.
Last modified: Fri, 05 Mar 2004


Site Details. Disclaimer. Comments? Questions? Dave Hillman
Content attribted to others remains their property. Otherwise the text and images are licensed under a Creative Commons License.
Creative Commons License Valid XHTML 1.0 Transitional Valid CSS!