Previous  Up  Next

Clean Up the A-arm


Now is a good time to clean up the A-arm.

One end will accept a sleeve from the new bronze bushing. Put brass shims under the sleeve till it is tight. The other end can be cleaned up so the bronze bushing will slide nicely over it. I used a lot of 400 grit sandpaper on this step.
Last modified: Fri, 05 Mar 2004


Site Details. Disclaimer. Comments? Questions? Dave Hillman
Content attribted to others remains their property. Otherwise the text and images are licensed under a Creative Commons License.
Creative Commons License Valid XHTML 1.0 Transitional Valid CSS!