Previous  Up  Next

Mirror Mounting Surface on the Door


The old mirror and its mount had seen better days. Not only was their build up of clear coat around the edges, the metal was pulled up particularly at the front mounting hole. This was handled with a bit of judicious pounding with a body hammer. The excess paint was wet sanded flat and then a series of finer grit polishing compounds was used to get the finish back to an acceptable level of flatness and polish.
Last modified: Fri, 26 Dec 2003


Site Details. Disclaimer. Comments? Questions? Dave Hillman
Content attribted to others remains their property. Otherwise the text and images are licensed under a Creative Commons License.
Creative Commons License Valid XHTML 1.0 Transitional Valid CSS!